Technical

Following are some of the technical specification used for pipe / insert sleeve coatings.

CoatingBrief Information
KCC  EX4413-F103 Designed for using as a stand alone of external pipe coating 
KCC EX4413-F700Designed for using as a stand alone of external pipe coating 
KCC EX4413-F210, Designed to increase coating performance in the harshest
environments.
KCC EX4413-A410Designed to increase coating performance in the harshest
environments.
KCC EX4413-L300Designed for using as a primer of 3 layer pipe coating mainly,
or as other coating systems optionally
KCC EX4700Designed for oil and gas pipeline which request high
temperature operation.
KCC EX4413-H200(S)Designed for oil and gas pipeline which request high
temperature operation.
KCC EX6700 Designed for oil and gas pipeline which request high
temperature operation.
KCC EX4413-LT100(A)Protect substrate from high heat damage.
KCC IC4888 Designed for inner corrosion protection of pipeline from the
corrosive environment encountered in the oil and gas industry
KCC PP100 Designed for use at high temperatures and pressures.
KCC IC4848 Designed for coating the interior girth weld of pipelines.
KCC EX4412Designed for corrosion protection of water pipeline
KCC ET5000 : SVR 100 %Reduces the frictional resistance of the inside of steel pipes for the
transportaion of natural gas by making a surface smoothly
ET5000(M) : SVR 75 %Reduces the frictional resistance of the inside of steel pipes for the
transportaion of natural gas by making a surface smoothly
KCC Thermocoat 3100 CLDesigned for steel substrates, as a high performance coating for splash & spill or in full time immersion as a tank lining.
KCC Thermocoat 3100 LSE A modification of the 3100 system, incorporating a unique LSE (low surface energy) topcoat ideally suited for automotive carrier coating and other non-stick applications.
KCC Thermocoat 3300  Designed for application over old, tightly bonded paints & coatings, without typical surface preparation. Includes surface wash, patented base coat and Thermocoat 3300 high performance topcoat.
KCC Thermocoat 5300Designed for severe chemical environments, including full time immersion at temperatures ranging to 275° F (135° C). Offers superior molecular permeation resistance coupled with our new Thermal Nanocomposite Primer. Abrasion resistance can be tailored to meet user needs. Applications include exterior coating under insulation, tank, vessel and reactor linings, trench and sump lining. Superior chemical resistance in caustics, inorganic or organic acids and numerous solvents.
  
JOTUN Jotapipe AC 1003This product is suitable for pipelines operating at continuous temperatures up to 98 °C (208 °F). However, product
performance including maximum operating temperature can depend on plant application, pipe configuration, coating
system and local field conditions.
JOTUN Jotapipe AC 1004This product is suitable for pipelines operating at continuous temperatures up to 100 °C (212 °F). However, product
performance including maximum operating temperature can depend on plant application, pipe configuration, coating
system and local field conditions.
JOTUN Jotapipe AC 1010This product is suitable for pipelines operating at continuous temperatures up to 98 °C (208 °F). However, product
performance including maximum operating temperature can depend on plant application, pipe configuration, coating
system and local field conditions.
JOTUN Jotapipe AC 1012This product is suitable for pipelines operating at continuous temperatures up to 110 °C (230 °F). However, product
performance including maximum operating temperature can depend on plant application, pipe configuration, coating
system and local field conditions.
JOTUN Jotapipe AC 2002This product is suitable for pipelines operating at continuous temperatures up to 100 °C (212 °F). However, product
performance including maximum operating temperature can depend on plant application, pipe configuration, coating
system and local field conditions.
JOTUN Jotapipe DL 3001This product is a fusion-bonded epoxy designed for use as an anti-slip rough coat to improve adhesion between
Jotapipe FBE coatings and concrete weight coat.
JOTUN Jotapipe DL 3002This product is a fusion-bonded epoxy designed for use as a topcoat to protect Jotun FBE coatings from mechanical
damage during handling, backfilling, directional drilling and general operation.
JOTUN Jotapipe DL 3003This product is a fusion-bonded polyester designed as a topcoat for Jotun fusion-bonded epoxy coatings to protect
against degradation from solar radiation and exposure to harsh weathering environments. It maintains the integrity of
the coating during yard storage of the coated pipes, during transportation and at the right of way.
JOTUN Jotapipe LT 1011This product is suitable for pipelines operating at continuous temperatures up to 98 °C (208 °F). However, product
performance including maximum operating temperature can depend on plant application, pipe configuration, coating
system and local field conditions.
JOTUN Jotapipe LT 2011This product is suitable for pipelines operating at continuous temperatures up to 98 °C (208 °F). However, product
performance including maximum operating temperature can depend on plant application, pipe configuration, coating
system and local field conditions.
JOTUN Jotapipe LT 7011This product is suitable for pipelines operating at continuous temperatures up to 98 °C (208 °F). However, product
performance including maximum operating temperature can depend on plant application, pipe configuration, coating
system and local field conditions.
JOTUN Jotapipe HT 1020This product is suitable for pipelines operating at continuous temperatures up to 120 °C (248 °F). However, product
performance including maximum operating temperature can depend on plant application, pipe configuration, coating
system and local field conditions.
JOTUN Jotapipe HT 2005This product is suitable for pipelines operating at continuous temperatures up to 120 °C (248 °F). However, product
performance including maximum operating temperature can depend on plant application, pipe configuration, coating
system and local field conditions.
JOTUN Jotapipe HT 1045This product is suitable for pipelines operating at continuous temperatures up to 140 °C (284 °F). However, product
performance including maximum operating temperature can depend on plant application, pipe configuration, coating
system and local field conditions.
JOTUN Jotapipe HT 2004This product is suitable for pipelines operating at continuous temperatures up to 150 °C (302°F). However, product
performance including maximum operating temperature can depend on plant application, pipe configuration, coating
system and local field conditions.
JOTUN Jotapipe JT 8101 
JOTUN Jotapipe JT 8201This product is suitable for pipelines operating at continuous temperatures up to 100 °C (212 °F). However, product
performance including maximum operating temperature can depend on plant application, pipe configuration, coating
system and local field conditions.
JOTUN Jotapipe JT 8301This product is suitable for pipelines operating at continuous temperatures up to 100 °C (212 °F). However, product
performance including maximum operating temperature can depend on plant application, pipe configuration, coating
system and local field conditions.
JOTUN Jotapipe RC 490Jotapipe RC 490 is suitable for repairs on pipelines operating at temperatures up to 155 °C (311 °F). It may show some
discolouration when exposed to higher temperatures. Product performance including maximum operating temperature
can depend on application and local field conditions.
  
PIPE CLAD  PFG70002High temperature drill pipe. Oil, gas and water wells. Gas lift
PIPE CLAD  PFL70002High temperature drill pipe. Oil, gas and water wells. Gas lift
PIPE CLAD  702GDrill pipe. Oil, gas and water wells. Rod pump wells. Gas lift
PIPE CLAD  702NC02 injection WAG. Oil, water and gas production. Brine injection and diposal. Line pipe, flow lines.
  
SigmaLine 2500l Fast curing, solvent free phenolic epoxy coating for pipeline externals
operating at temperatures above 60°C /140°F
SigmaLine 2000 Solvent free phenolic epoxy coating for pipeline external rehabilitation
(bell holing jobs) operating at temperatures above 60°C /140°F
SigmaLine 859Fast curing, solvent free polyurethane tar coating for pipeline externals 
SigmaLine 855Fast curing, solvent free, British Gas CW6 approved, polyurethane coating
for pipeline externals
SigmaLine 533 (Amercoat 133PL)Solvent free, API RP5 L2 approved, epoxy flow coating for internal
lining of natural gas pipelines
SigmaLine 403Solvent based, API RP5 L2 approved, epoxy flow coating for internal
natural gas pipelines
SigmaLine 523Solvent free, KIWA approved, epoxy coating for pipeline internals
carrying potable water
SigmaLine 445Solvent based high build phenolic epoxy in-situ coating for internal pipeline
rehabilitation resistant to water, crude oil and petrochemical products
  
3M™ Scotchkote™ Fusion Bonded Epoxy Coating 6233P3M™ Scotchkote™ Fusion Bonded Epoxy Coating 6233P is a high performance  3M’s proprietary advanced adhesion promotion technologies. 3M’s patented technology is an advanced formula designed for improved cathodic disbondment.


3M™ Scotchkote™ Fusion Bonded Epoxy Coating 62333M™ Scotchkote™ Fusion Bonded Epoxy Coating 6233 is a fusion bonded epoxy powder coating utilizing special adhesion promoting agents to enhance                cathodic.
3M™ Scotchkote™ Fusion Bonded Epoxy Coatings 226N/226N+3M™ Scotchkote™ Fusion Bonded Epoxy Coatings 226N/226N+ helps provide the same properties as the Scotchkote coating 6233 with improved damage resistance.
3M™ Scotchkote™ Fusion Bonded Epoxy Coating 62583M™ Scotchkote™ Fusion Bonded Epoxy Coating 6258 is a one part, heat curable, thermosetting coating designed to promote superior adhesion to steel and epoxy novolak resins that significantly raise the glass transition temperature of the coating. These benefits make this a suitable standalone coating and as a liner for downhole tubing.
3M™ Scotchkote™ Fusion Bonded Epoxy Coating 61713M™ Scotchkote™ Fusion Bonded Epoxy Coating 6171 is a one-part, heat curable, thermosetting, powdered epoxy coating designed for coating the interior of production tubing, internal gathering pipe, and fittings.

3M™ Scotchkote™ Fusion Bonded Epoxy Coating 626 Series3M™ Scotchkote™ Fusion Bonded Epoxy Coating 626 series offers solutions to address new challenges and needs for high-temperature pipeline coatings in the oil and gas industry. 
3M™ Scotchkote™ Fusion Bonded Epoxy Coating 63523M™ Scotchkote™ Fusion Bonded Epoxy Coating 6352 is an extremely hard, mechanically strong overcoating designed to help protect the primary corrosion coat from damage during pipeline directional drilling applications
3M™ Scotchkote™ Fusion Bonded Epoxy 207R3M™ Scotchkote™ Fusion Bonded Epoxy Coating 207R is a rough overcoating.  Scotchkote overcoating 207R was specifically developed to help provide added traction for guide/feed wheels used in the installation of offshore pipelines.
3M™ Scotchkote™ Fusion Bonded Epoxy Coating 226N/226N+3M™ Scotchkote™ Fusion Bonded Epoxy Coating 226N/226N+ is a premier, highperformance epoxy coating powder especially hot, wet environments
3M™ Scotchkote™ Liquid Phenolic Primer 3453M™ Scotchkote™ Liquid Phenolic Primer 345 is designed specifically for application to metal surfaces prior to top coating with Scotchkote FBE coatings. 
3M™ Scotchkote™ Water Based Primer 500N3M™ Scotchkote™ Water Based Primer 500N is a water-based metal treatment designed to increase adhesion of fusion bonded epoxy coatings 
3M™ Scotchkote™ Fusion Bonded Epoxy 134 (green)3M™ Scotchkote™ Fusion Bonded Epoxy Coating 134 (green) is  Scotchkote coating 134 has been used extensively in the wastewater industry since 1965
3M™ Scotchkote™ Fusion Bonded Epoxy Coating 1353M™ Scotchkote™ Fusion Bonded Epoxy Coating 135 (green) is  Scotchkote coating 135 has been used extensively in the wastewater industry since 1965
3M™ Scotchkote™ Fusion Bonded Epoxy Rebar Coating 413 3M™ Scotchkote™ Fusion Bonded Epoxy Rebar Coating 413 is Components have been carefully selected and balanced to maintain consistency and productivity control in all application plants. 
3M™ Scotchkote™ Liquid Epoxy Coating 323 3M™ Scotchkote™ Liquid Epoxy Coating 323 is a 100% solids, two-part epoxy liquid coating designed to help protect pipelines and other metal surfaces from corrosion. 
3M™ Scotchkote™ Liquid Epoxy Coating 327 3M™ Scotchkote™ Liquid Epoxy Coating 327 is  corrosion for temperatures down to 50°F/10°C. Cold weather doesn’t mean you have to compromise on performance or easy application!
3M™ Scotchkote™ Abrasion Resistant Epoxy Coating 328 3M™ Scotchkote™ Abrasion Resistant Epoxy Coating 328 is a 100% solids, two-part epoxy system designed for directional drilling, rocky terrain, or other applications
3M™ Scotchkote™ Liquid Urethane Coating 352 3M™ Scotchkote™ Liquid Urethane Coating 352 is a 100% solids, two-part urethane system designed to help protect buried steel structures from the harsh effects of corrosion. 
3M™ Scotchkote™ Epoxy Coating 162PWX3M™ Scotchkote™ Epoxy Coating 162PWX has been specifically developed to help provide corrosion resistance in potable water applications. 
3M™ Scotchkote™ Urethane Coating 165HB3M™ Scotchkote™ Urethane Coating 165HB, is  Used for diverse applications including internal and external protection of steel and concrete pipes, tanks, and vessels, bridges and related building and engineering structures and fabrications.
3M™ Scotchkote™ Epoxy Coating 162HB3M Scotchkote™ 162HB Epoxy Coating helps provide excellent corrosion resistance for both internal and external surfaces. used to coat pipes, tanks, vessels and other equipment in contact with sea water, raw water and wastewater.
3M™ Scotchkote™ Fusion-Bonded Epoxy Coating 134W3M™ Scotchkote™ Fusion-Bonded Epoxy Coating 134W is  baked on epoxy coating used for application potable water. 
  
Valspar 2000FBE for single-, dual- & three-layer applications
Valspar 2040 AROAbrasion Resistant overcoat
Valspar Rough CoatRoughcoat FBE for concrete coating
Valspar HOT 120High Operating Temp FBE – 120C
Valspar HOT 150High Operating Temp FBE – 150C 
Valspar LAT Low Application Temp FBE
Valspar UV CoatUV Resistant Overcoat
Valspar PFG70002High temperature drill pipe. Oil, gas and water wells. Rod pump wells. Gas lift.
Valspar PFL70004 High temperature drill pipe. Oil, gas and water wells. Rod pump wells. Gas lift.
Valspar 702GDrill pipe, Oil, gas and water wells. Rod pump wells. Gas lift.
Valspar 373D70002CO2 injection WAG. Oil, water and gas production. Brine injection and disposal. Line pipe, flow lines.
Valspar 702NCO2 injection WAG. Oil, water and gas production. Brine injection and disposal. Line pipe, flow lines.
Valspar Flowliner 930R CSDrill pipe, Oil, gas and water wells. Rod pump wells. Gas lift.
Valspar Flowliner 930R HSDrill pipe, Oil, gas and water wells. Rod pump wells. Gas lift.
Valspar Flowliner 930R UHSDrill pipe, Oil, gas and water wells. Rod pump wells. Gas lift.
  
Akzonobel Fusion Bonded Epoxy (Corvel 7P-0200 Primer)Phenolic  based liquid Coating excellent adhesion of fusion applied Resicoat
Akzonobel Fusion Bonded Epoxy (Corvel EP-10 Primer 1P-0010)Phenolic  based liquid Coating designed for priming the inside of steel pipes prior to the application of high performance Resicoat
Akzonobel Fusion Bonded Epoxy (10-8158) Oil and Gas application Line Pipe, C02, Salt Water, Waste Water
Akzonobel Fusion Bonded Epoxy – HMH09QF Fusion Bonded Epoxy Coating Oil and gas Power
Akzonobel Fusion Bonded Epoxy – HKF47RFusion Bonded Epoxy Coating Oil and Gas application Line Pipe, Drinking Water, Salt Water, Waste Water
Akzonobel Fusion Bonded Epoxy Resicoat HJH01RFusion Bonded Epoxy Coating Oil and gas Architecture and construction
Akzonobel Fusion Bonded Epoxy – HLF2AQF Fusion Bonded Epoxy Coating Oil and Gas application Tubing Casing 
Akzonobel Fusion Bonded Epoxy – (78-7001-60)Fusion Bonded Epoxy Coating Oil and gas Automotive Electronics, gas Power
Akzonobel Fusion Bonded Epoxy- (10-6051)Fusion Bonded Epoxy Coating Oil and Gas application Line Pipe, Drill Pipe, Tubing Casing 
Akzonobel Fusion Bonded Epoxy- HKH12QF Fusion Bonded Epoxy Coating Oil and Gas Furniture and flooring Water Domestic appliances

Akzonobel Fusion Bonded Epoxy- HNF13QFFusion Bonded Epoxy Coating Excellent abrasion / wear resistance, good chemical and solvent resistance, good exterior durability, low coefficient of frction, and excellent machinability
Akzonobel Fusion Bonded Epoxy – HMH10QF (10-8233)Fusion Bonded Epoxy Coating Oil and Gas application girth weld
Akzonobel Fusion Bonded Epoxy – (10-8233)Fusion Bonded Epoxy Coating Oil and Gas application girth weld
Akzonobel Fusion Bonded Epoxy- HKH15QFOil and Gas application girth weld
Akzonobel  Fusion Bonded Epoxy – Corvel EP – 10 Primer 1P – 0010)Application of high performacne Resicoat FBE Powder Coating
Akzonobel Fusion Bonded Epoxy – HGH02RPipes for drinking water requirment. The powder is applied by spray application
Akzonobel Fusion Bonded Epoxy – HKF47R R4-ESFusion Bonded Epoxy Coating corrosion protection 
Akzonobel Fusion Bonded Epoxy – Corvel 10-6051 Green (HKH12QF)Fusion Bonded Epoxy Coating Oil & Gas H2S, CO2, CH4 and petroleum distillates
Akzonobel Fusion Bonded Epoxy –  (HKH12QF)Fusion Bonded Epoxy Coating Oil and gasPower, Architecture and construction, Automotive, Electronics, Furniture and flooring, Water, Domestic appliances

 

CoatingBrief Information
3M Scotchkote 134 FBEWater and Wastewater Application
3M Scotchkote 345Liquid Phenolic Primer
3M Scotchkote XC 6171Fusion Bonded Epoxy Coating
7409 Sigma PhenGuard 930
Resistance to a wide range of organic acids, alchol, edible oils, fats & solvents
7435 Sigma PhenGuard 935Good resistance to hot water
7436 Sigma PhenGuard 940Tank coating system for Chemical tankers
7497 SigmaLine 2000To metal for pipe externals
Akzonobel Enviroline 405HTProcess vessels and tanks operating at high temperature
Hempel Hempadur 85671Water and chemical resistance
Akzonobel Interline 850To provide corrosion protection for the internals of steel storage tanks
Akzonobel Intertherm 228provide a corrosion resistant barrier
Akzonobel Interzone 954Cathodic disbondment resistance
Carboline Plasite 7159 PDS 1-07water-resistant epoxy coating polymerized with a polyamine type curing agent.
Carboline Plasite 7159High abrasion resistant version
Sigmashield 1200Water hull of ice going & ice breaking vessels
Akzonobel Corvel 10-6051Used at elevated temperature and pressure in drill pipe, production tubing, valves and fittings
Akzonobel Corvel 10-8158is a melt-mixed, 100% solids thermosetting epoxy powder coating designed for coating the internal surface of pipe for use in the secondary recovery of oil.
Akzonobel Corvel EP-10 Primer IP-0010is a phenolic based-liquid coating designed for priming the inside of steel pipes prior to the application of high performance Resicoat® FBE powder coating.
Akzonobel R4-ES HKF47RR4-ES HKF47R is a spray applied Fusion Bonded Epoxy Coating designed for corrosion protection of earth-laid valves and fittings, hydrants, pumps and pipe drains.
Akzonobel Corvel 7P-0200 Primerphenolic based liquid coating which provides excellent adhesion of fusion applied Resicoat® nylon powder coatings to ferrous and non-ferrous metal surfaces.
Akzonobel Pipe Internal ProductsAkzoNobel Resicoat Pipe Internal Products
702G Internal Pipe Coating System702G is a thermosetting epoxy powder coating engineered for use inside pipelines. It is typically applied over phenolic primers such as Valspar Pipeclad HXR0015.
Pipe Clad Phenolic Primer HXR0015is engineered to be applied as a universal primer on steel surfaces for interior pipeline coatings. It is compatible with fusion bonded epoxy (FBE) powder coatings, phenolic and phenolic/epoxy liquid coatings for applications on drill pipe, lined pipe and downhole tubing.
Hempel Hempadur Multi-Strength 35530is a solvent-free, two-component, high-build, polyamine cured epoxy paint, which cures to a coating with good resistance to fresh water, sea water, crude oil, and to
abrasion.
RAM – 100RAM – 100
Sigma Novaguard 840Two-component, solvent-free, amine-cured novolac phenolic epoxy coating.
Hempel’s Curing Agent 97371It is used in Metal Industries, Ships and Shipyards, Industrial applications used by spraying.
Hempel Hempadur Multi-Strength GF 35870HEMPADUR MULTI-STRENGTH GF 35870 is an amine-adduct cured epoxy coating – the product is reinforced with Glassflakes. It is a hard, impact and abrasion resistant coating with good resistance to sea water, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products.Suitable for early water exposure and will continue to cure under water.
CoatingBrief Information
KCC-IC-4888Good resistance to hot water
Akzonobel Resicoat HKF47RResicoat® R4-ES HKF47R is a spray applied Fusion Bonded Epoxy Coating designed for corrosion
protection of earth-laid valves and fittings, hydrants, pumps and pipe drains.
Akzonobel Resicoat HJH01R 
Akzonobel Resicoat HGH02RResicoat® R4-ES HGH02R is a modified R4 powder with a longer gel time used for larger valves and
pipes for drinking water requirement. The powder is applied by spray application.
Akzonobel Resicoat HLF2AQF 
Akzonobel Resicoat HNF13QFResicoat® PI HNF13QF (Corvel® 76-7001) Black is a fluid bed dip grade nylon powder coating with
excellent abrasion / wear resistance, good chemical and solvent resistance, good exterior durability,
low coefficient of friction, and excellent machinability.
Akzonobel Resicoat HKH12QFResicoat® PI HNF13QF (Corvel® 76-7001) Black is a fluid bed dip grade nylon powder coating with
excellent abrasion / wear resistance, good chemical and solvent resistance, good exterior durability,
low coefficient of friction, and excellent machinability.
Akzonobel Resicoat HKH15QF 
Akzonobel Resicoat HJH05QF 
Akzonobel Resicoat HMH10QF 
Hempel Hempadur 45881HEMPADUR MASTIC 45880/45881 is a two-component polyamide adduct cured, high solids, high build epoxy paint. It forms a hard and tough coating, has good wetting
properties and low temperature curing.
Akzonobel Interline 984A two component, solvent free chemically resistant heavy duty epoxy phenolic tank lining.
Carboline Plasite 7159A water-resistant epoxy coating polymerized with a polyamine type curing agent. A high
performance lining for elevated temperature and pressure immersion services in high purity water,
as well as the oil/water separating processes encountered in the petroleum industry.

 

Jotun Jotapipe AC 1003This product is a fusion-bonded epoxy designed as an anti-corrosion coating for pipelines. The product is available in a
choice of reactivities to ensure suitability as both a stand-alone FBE and a primer in multi-layer polyolefin systems

SSPC – The Society for Protactive Coating

SSPCBrief Information
SSPC AB 1Mineral and Slag Abrasives
SSPC AB 2Cleanliness of Recycled Ferrous Mettalic Abrasives
SSPC AB 3Newly Manufactured or Re-Manufactured Steel Abrasives
SSPC PA 1Shop, Field, and Maintenance Painting of Steel
SSPC PA 2Measurement of Dry Coating Thickness with MagneticG ages
SSPC PS GUIDE 1Guide for selecting Oil Base Painting Systems
SSPC PS GUIDE 2Guide for selecting Alkyd Painting Systems
SSPC PS GUIDE 3Guide for selecting Phenolic Painting Systems
SSPC PS GUIDE 4Guide for selecting Vinyl Painting Systems
SSPC PS GUIDE 7Guide for selecting One-Coat Shop Painting Systems
SSPC PS GUIDE 8Guide for Topcoating Zinc-Rich Primers
SSPC PS GUIDE 12Guide Zinc-Rich Coating Systems
SSPC PS GUIDE 15Guide for selecting Chlorinated Rubber Painting Systems
SSPC PS GUIDE 17Guide for selecting Urethane Painting Systems
SSPC PS GUIDE 19Guide for selecting Painting Systems for Ship Buttoms
SSPC PS GUIDE 20Guide for selecting Painting Systems for Boottoppings
SSPC PS GUIDE 21Guide for selecting Painting Systems for Topsides
SSPC SP 1Solvent Cleaning
SSPC SP 2Hand Tool Cleaning
SSPC SP 3Power Tool Cleaning
SSPC SP 5White Metal Blast Cleaning
SSPC SP 6Commercial Blast Cleaning
SSPC SP 7Brush-off Blast Cleaning
SSPC SP 8Pickling
SSPC SP 10Near-White Blast Cleaning
SSPC SP 11Power Tool Cleaning to Bear Metal
SSPC SP 12Surface Preparation and Cleaning of Steel and Other Hard Materials by High- and Ultrahigh-Pressure Water Jetting Prior to Recoating
SSPC SP 13Surface Preparation of Concrete

National & International Standard

StandardBrief Information
Nace Standard RP0274High-Voltage Electrical Inspection of
Pipeline Coatings
In-Situ Internal Epoxy CoatingIn-Situ Epoxy Coating For Metallic Pipe
ASTM D-2240Standard Test Method for Rubber Property-Durometer Hardness
Liquid Epoxy Coating PipelineLiquid epoxy coatings for today’s pipeline coating
challenges
Nace RP0188-2009Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates
SP0106-2006-Internal CorrosionControl of Internal Corrosion in Steel Pipelines
and Piping Systems
SSPC – AB3For newly manufactured steel abrasive or re-manufactured steel abrasive for use in surface preparation by blast cleaning
Nace RP-0287-2002 Surface ProfileField Measurement of Surface Profile of Abrasive
Blast-Cleaned Steel Surfaces Using a Replica Tape
Internal Epoxy Coating for Pipelinesthe minimum requirements for internal flow coating of pipelines, with epoxy based material.
D4285Standard Test Method for
Indicating Oil or Water in Compressed Air
Nace 0175Metals for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments
RP-018194Liquid-applied internal protective Coatings for Oilfield Production Equipment
C686Parting Strength of Mineral Fiber Batt- and Blanket-Type
Insulation
NABL-104The specific criteria requirements for an electrical testing
laboratory, in addition to the general requirements of ISO/ IEC 17025: 2005.
Nace No 1 SSPC SP5White Metal Blast Cleaning
Nace No 2 SSPC SP10Near White Metal Blast Cleaning
Nace No 3 SSPC SP6Commercial Blast Cleaning
Nace No 4 SSPC SP7Brush-Off Blast Cleaning
Nace No 5 SSPC SP12Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating
Nace No 6 SSPC SP13Surface Preparation of Concrete
Nace No 8 SSPC SP14Industrial Blast Cleaning
Nace No 10 SSPC PA6Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Above ground Storage Tanks
Nace No 11 SSPC PA8Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels
Nace No 12 AWS C2.23M SSPC CS23Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel

 

StandardBrief Information
NACE RP0394Application, Performance, & Quality Control of Plant-Applied Single-layer Fusion-Bonded Epoxy External Pipe Coating
NACE RP0287Field Measurement of surface profile of Abrasive Blast Cleaned Steel Surfaces Using a Replica Tape.
NACE SP0490Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatings of 250 to 760 Micrometres (10 to 30 Mils).
NACE TM0384Holiday Testing of Internal Tubular Coating.
NACE RP287

NACE Standard Recommended Practice for Field Measurement of Abrasive Blast Cleaned Surfaces Using a Replica Tape.

 

StandardBrief Information
CSA Z245.20Series-14 Plant-Applies Exteral Coating for Steel Pipe.
API 5L7Recommended Practice for Unprimed Internal Fusion Bonded Epoxy Coating of Line Pipe
API 5L9External Fusion Bonded Epoxy Coating of Line Pipe.

ISO STANDARD

StandardBrief Information
ISO 8501-1Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings. (Sa2.5 “very through blast-cleaning”).
ISO 8501-2Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Preparation grades of previously coated steel substrates after localized removal of previous coatings.
ISO 8501-3Preparation of Steel Substrates before Application of Paints and Related Products – Visual Assessment of Surface Cleanliness – Part 3: Preparation Grades of Welds, Edges and Other Areas with Surface Imperfections.
ISO 8502-3Assessment of Dust on Steel Surface Prepared for Painting.
ISO 8502-4Preparation of Steel Substrates before Application of Paints and Related Products – Tests for the Assessment of Surface Cleanliness – Part 4: Guidance on the Estimation of the Probability of Condensation Prior to Paint Application.
ISO 8502-6Extraction of Soluble Contaminants for Analysis the Bresle Method.
ISO 8502-9Field method for the conducto metric determination of water-soluble salts.
ISO 8503-1Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces.
ISO 8503-2Method for the grading of surface profile of abrasive blast-cleaned steel – Comparator procedure.
ISO 8503-3Method for the calibration of ISO surface profile comparators and for the determination of surface profile– Focusing microscope procedure.
ISO 8503-4Method for the calibration of ISO surface profile comparators and for the determination of surface profile– Stylus instrument procedure.
ISO 8503-5Replica tape method for the determination of the surface profile.
ISO 11124-3Specifications for Metallic Blast-Cleaning Abrasives-Part 3: High-Carbon Cast-Steel Shot and Grit.
ISO 11125Test Methods for Metallic Blast-Cleaning Abrasives.
ISO 11126-10Specification for Non-metallic Blast-Cleaning Abrasives- Part 10: Almandite Garnet.
ISO 11127-1Test Methods for Non-metallic Blast-Cleaning Abrasives.

ASTM Standard

StandardBrief Information
ASTM D4417Field Measurement of Surface Profile of Blasted Cleaned Steel.
ASTM D6677Standard Test Method for Evaluating Adhesion by Knife.
ASTM D7393Standard Practice for Indicating Oil in Abrasives.
ASTM D4285Standard Test Method for Indicating Oil or Water in Compressed Air.
ASTM D4940Standard Test Method for Conducti metric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives.
ASTM D5162Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates.
ASTM D3359Standard Methods-Measuring Adhesion By Tape Test.
ASTM D2697Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D4752Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
ASTM D2583Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor.

SECTION 15076 – CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE

This Section designates the requirements for steel pipe fabrication, test in shop, installation of steel pipe, fabrication of steel sheet or plate, mill-manufactured steel pipe, bends, special pipes with outlets, pass holes, flanges and all other fittings.

Reference Standard

AWWA C200Steel Water Pipe 6-inches and larger
AWWA C205Cement-mortar protective lining and coating
AWWA C207Steel Pipe Flanges
AWWA C210Coal-tar epoxy coating system for interior and exterior of steel water pipelines
AWWA C213Fusion-Bonded epoxy coating for the interior and exterior of steel water pipelines
AWSStandard Qualification Procedure for Manual Welding Operators
ASMEBoiler and Pressure Vessel Code

 

American Water Works Association – ANSI / AWWA C205-89

ANSI / AWWA C205-89AWWA Standard for Cement-Mortar Lining and Coating for Steel Water Pipe – 4 IN. and Larger – Shop Applied.

 

The world's most accessible inventory

Reli-sleeve is having largest stocks of piping products ready to ship today on your customize order, from commodity carbon steel piping to rare and specialty alloy products.

For the the latest information on products in stock, call: +(91) – (22) -43431313 (25 Lines)

Third Party Inspection

Our team of experts maintain a vigil on the quality of the products. Every single piece is attached with test certificates and reports.

Quality Assurance

The quality assurance system is guided by principles that support our unique working culture which incorporates respect.

Quick Delivery

We can supply or export our Products and Services to Worldwide with best delivery companies on time as per our principles.

Best Customer Support

Build strong relationships with our customers – which we achieve, for example, by employing and training local workforce.